How much herbicidepesticide is used for a GMO farm in comparison to a normal one?
Submitted by: Hileaeyesus Solomon
Expert response from Graham Brookes
Agricultural Economist, PG Economics Ltd, UK
Friday, 04/06/2018 19:30
In order to answer this question, it is important to first be clear about what a GMO/GMO farm is and secondly to discuss the complex issues relating to herbicide and pesticide use.
What is a GMO/GMO farm?
It is assumed that this question refers to genetically modified crops. GM crop technology has been widely used since the mid-1990s and in 2016 were planted on about 178 million hectares worldwide. The main GMO traits convey:
- Tolerance to specific herbicides (notably to glyphosate) in maize, cotton, canola (spring oilseed rape), soybean, sugar beet and alfalfa. This GM herbicide tolerant (GM HT) technology allows for the ‘over the top’ spraying of GM HT crops with these herbicides, that target weeds but do not harm the crop itself – the aim of the technology is to provide farmers with better (and usually cheaper) weed control than is possible with conventional crops;
- Resistance to specific insect pests of maize, cotton, soybeans and brinjal. This GM insect resistance (GM IR), or ‘Bt’ technology offers farmers resistance in the plants to major pests of these crops – the aim of the technology is to control these pests more effectively than is possible in conventional crops, where the most common form of control used is insecticides.
The nature of these two main types of GMO trait means that GM IR crop technology has no impact at all on herbicide use – its main pesticide-related impact is associated with insecticide use – it replaces insecticides.
GM HT crops are the only type of GMO that impacts on herbicide use. Herbicides are still used but the nature and type of herbicides applied changes.
A GMO farm – it is assumed this refers to any farm on which seed containing a GMO trait has been planted. This includes farms that plant only GM crops and those that plant a mix of GM and conventional (non-GM) crops.
A ‘normal one’ – it is assumed this refers to a farm that uses ‘conventional’ seed (non-GM crop technology).
What are herbicides and insecticides used for?
Weeds cause major problems for farmers – they compete with crops for water and nutrients in the soil and can have a significant negative effect on crop yields. Farmers spend a lot of time and money trying to control weeds and the main method used is to apply herbicides. These need to be carefully targeted at, and, applied to weeds so as not to damage or kill the crops themselves. GM HT crops make weed control easier, cheaper and more effective than is possible with conventional cropping largely because the risk of damage to the crop from herbicides is effectively removed.
Pests also cause major problems for farmers – they can damage or even destroy crops. They can have a significant negative effect on yields. Farmers spend a lot of time and money trying to control pests and the main method used is to apply insecticides. Application needs to be carefully timed to ensure maximum effectiveness and in the case of some pests it is crucial this occurs before the pests eat their way into plants (as many do). Several applications are often required, and in a crop like cotton, it is common for conventional crops to receive many (eg, 15-20) applications in one season. GM IR crops make pest control easier and more effective than is possible with conventional cropping because control is contained within the plant and farmers do not have to spend time monitoring pest levels and spraying their crops in order to control these pests.
How much herbicide/insecticide is used on a GM crop compared to a non-GM crop?
Use of herbicides and insecticides vary by crop and location regardless of type of production – GM or conventional. This is mainly due to weed and pest pressures which vary by crop, location and season.
In relation to GM versus conventional crop use of insecticides, GM IR crops use less insecticides- in the period 1996-2015, in the two main crops where GM IR technology has been used for over 20 years (maize and cotton), 358 million kg less insecticide has been used on the area planted to these crops than would otherwise have been used (source: Brookes and Barfoot, 2017). This is roughly equal to about 75 percent of the total amount of pesticide applied to crops in China in one year (in other words is a substantial amount).
In relation to GM versus conventional crop use of herbicides, there are examples where GM HT crops use more, less or the same amount of herbicide as conventional crops. In the period 1996-2015, in the four main crops where GM HT technology has been used for over 20 years (maize, cotton, soybeans and canola), 261 million kg less herbicide has been used on the area planted to these crops than would otherwise have been used (source: Brookes and Barfoot, 2017). However, within this total, herbicide use fell in maize, cotton and canola by about 8 percent, 8 percent and 18 percent respectively, but increased marginally by 0.5 percent in soybeans.
Is increased herbicide use bad?
Not necessarily. The issues are complex and context is required.
A key context is agriculture’s impact on the environment. Firstly, all forms of agriculture, GMO, conventional or organic are not natural and therefore all farmers are engaged with a ‘fight with nature’ to secure their production. This means that pests and weeds need to be controlled if humans are to feed themselves. The balance is to secure and maximize production as efficiently as possible, whilst at the same time, minimize the negative impact on the environment of the weed and pest control methods used.
As indicated above, herbicides are the main form of weed control used in agriculture. Therefore, if agricultural productivity is to be maximized, with the least environmental impact, herbicide use needs to have the smallest environmental ‘footprint’ possible. This does, however, not necessarily mean less herbicide = less environmental footprint or more herbicides = a bigger environmental footprint because the amount of herbicide applied to a crop is not necessarily a good measure of the impact on the environment because the toxicity of each herbicide is not directly related to the amount (weight) applied.
Secondly, pests and weeds develop resistance to all forms of control humans try to impose on them. This is an inevitable consequence for all forms of agriculture, whether GM, conventional or organic forms of production are used. This means that farmers have to change and adapt their pest and weed control practices to minimize resistance development and maintain effective levels of pest and weed control. A common feature of this resistance management is the application of a mix of control measures, which may include using a wider range or mix of herbicides or insecticides.
Thirdly, in looking at trends in usage of herbicides on crops, it is important consider what the alternative would be – this means that it may be possible to see a trend of increased use in herbicides that uses one production system that would be even higher if an alternative and different production was used.
These contextual factors are important to understanding changes in herbicide use with GM HT crops.
Where the use of GM HT crops has resulted in increased use of herbicides, what does this mean for the environment?
A key impact of GM HT crop use has been a change in the profile of herbicides typically used. In general, a fairly broad range of, mostly selective herbicides that target grass weeds or broad-leaved weeds have been replaced by one or two ‘broad-spectrum’ or general herbicides (mostly glyphosate - that target both grass and broad-leaved weeds) used in conjunction with one or two other (complementary) herbicides. This has resulted in:
- Aggregate reductions in both the volume of herbicides used (in terms of weight of active ingredient applied) and the associated environmental impact (in terms of toxicity) when compared to usage on conventional (non-GM) crops in some countries, indicating net improvements to the environment;
- In other countries, the average amount of herbicide active ingredient applied to GM HT crops represents a net increase relative to usage on the conventional crop alternative. However, even though the amount of active ingredient use has increased, in terms of the associated environmental impact, the environmental profile of the herbicides used with the GM HT crop has commonly been better than its conventional equivalent;
- Where GM HT crops have been widely grown (eg, the USA), incidences of weed resistance to glyphosate have occurred. This can be attributed to how glyphosate was originally used with GM HT crops, where because of its high effectiveness in controlling weeds, it was often used as the sole method of weed control. This approach to weed control contributed to the evolution of weed populations becoming resistant to glyphosate. As a result, growers of GM HT crops have been and, are increasingly being advised to include other herbicides (with different and complementary modes of action to glyphosate) in combination with glyphosate and in some cases to adopt cultural practices (eg, mechanical weed control) in more integrated weed management systems. At the national level, these changes have influenced the mix, total amount and overall profile of herbicides applied to GM HT crops in the last 15 years. Compared to 10-15 years ago, the amount of herbicide active ingredient applied and number of herbicides used with GM HT crops in many regions has increased, and the associated environmental profile, deteriorated. This increase in herbicide use relative to several years ago is often cited by anti GM technology proponents as an environmental failing of the technology. However, what such authors fail to acknowledge is that the amount of herbicide used on conventional crops has also increased relative to several years ago and that compared to the conventional alternative, the environmental profile of GM HT crop use has continued to provide an improved environmental profile compared to the conventional alternative. It should also be noted that many of the herbicides used in conventional production systems had significant resistance issues themselves in the mid 1990s. This was, for example, one of the reasons why GM HT soybeans were rapidly adopted in the late 1990s, as glyphosate provided good control of these weeds.
Brookes G and Barfoot P (2017) Environmental impacts of GM crop use 1996-2015: impacts on pesticide use and carbon emissions, GM Crops and Food Journal 2017 8,2, p117-147 http://dx.doi.org/10.1080/21645698.2017.1309490
Graham Brookes is an agricultural economist with the UK-based analysts’ PG Economics (www.pgeconomics.co.uk). He has been studying the impact of crop biotechnology for nearly 20 years and is author of 25 peer reviewed papers on the economic and environmental impact of crop biotechnology.
How GMOs are Researched, Developed and Tested
Learn how plant biotechnology works through the scientists who research, develop and test GMO crops at Dupont.